FCT-941 Fan Coil Thermostat

Is designed to control fan coil unit system, by switching on/off on 3 fan speed + 1 modulating Heating
valves + 1 modulating Cooling valves with Modbus communication.

RMU-941 Room Monitoring Unit

RMU-941 Room Monitoring Unit with Temperature & Humidity Sensor
The RMU-941 is a compact monitoring device designed for real-time measurement of room temperature and humidity.

FRB-541 FCU Relay Box

FRB-541 fcu relay box is your best solution for controlling the Fan coil unit, it comes with 4 relays (high duty) for speeds and the heater,
with interfacing contact between it and the fire alarm system through the FAP
point main usage of it to disconnect the fan in case of fire by connecting it with fire alarm system control module,
also can be used for saving energy mode, and internal transformer 24V AC in order to powering the PICV actuator.
Easy play and plug connecting the terminals of PICV, thermostat and the FAP point.

IMB-142 Input output Modbus RTU module

OP-IMB-142 is a new version from our RTU modules based on Modbus RTU communication protocol which is used with PLCs and
DDCs /BMS Controllers, comes with 8 Relay outputs, 12 universal inputs, and 8 analog outputs, ABS IP55,voltage for the power (24VAC)
supporting web browser page to configure the communication setting and inputs Configurations { Digital Input / Analog Input / NTC10K
PT1000}.

IMB-143 Input output Modbus TCP module

IMB-143 is a new version from our Modbus modules based on Modbus TCP communication
protocol which is used with PLCs and DDCs /BMS Controllers, comes with 8 Relay outputs,
12 universal inputs, and 8 analog outputs, ABS IP55, input voltage for the power
(24 VAC) or (30 VDC) supporting web browser page to configure the
communication setting ,IMB-143 Module Modbus TCP is a versatile
device designed to facilitate seamless integration of analog and digital
inputs and outputs into Modbus TCP/IP networks. With its robust
design and flexible configuration options, this module serves as an ideal
solution for industrial automation applications requiring reliable data
acquisition and control capabilities.

IMB-252D Input/Output Modbus RTU Module

IMB-252D is a new version from our modules based on Modbus TCP communication protocol which is used with
DDCs /BMS Controllers, comes with 20 digital inputs, and 8 relay outputs, ABS IP55,voltage for the power (24VAC) supporting web
browser page to configure the communication setting.

IOTC-1041 Modbus TCP Module

Modbus TCP Module

Supports Modbus , M-BUS

ABS Material IP55.

24V AC Power Supply.

8 Relay Outputs, 8 Analog Outputs and 12 Universal Inputs.

Wifi-webserver for configurations.

IRC-114X Intelligent IR Controller

The IRC-1141 is an innovative IR controller specifically designed for Energy Saving & managing split-unit air conditioners. This device
combines advanced sensing capabilities, multi-protocol communication, and user-friendly configuration, making it ideal for modern
HVAC systems. Equipped with Modbus RTU and MQTT communication protocols, the IRC-1541 offers seamless integration with smart
building automation systems and IoT platforms.4.

ODC-341 BMS Controller

ODC-341 Provide communication to BACnet and Modbus systems. It can act as a gateway between BACnet/IP,
BACnet/MSTP and Modbus networks. It is fully programmable with a graphical programming language supporting
HVAC functions, time scheduling, alarms and histories.
it has been built using Sedona Framework™.
In a BACnet system, devices can be connected to different physical network such as Ethernet and RS485. In order to
communicate across these physical networks, a BACnet router is required and each physical network is given a unique
network number in the range 1 to 65535. In addition to the network numbers, each device on the network must be
given a unique device ID in the range 0 to 4194303 regardless of the physical network that it is located in.
These 3 settings are the bare minimum settings that require to be changed.
The API provides an interface for communicating to BACnet and Modbus Systems.
The OBIX API provides an easy way to integrate into Niagara or any other system that supports OBIX.
The following features of the OBIX Version 1.1 specification are supported
•Reading and Writing of values.
•Subscribing to real time data for returnin COV’s using the OBIX Watch.
•Histories for returning time stamped data.
•Alarms for returning time stamped events.

OMM-351 Mixed Modbus RTU Module

The OMM-351 is a versatile mixed I/O module designed for industrial and building automation.
It provides flexible input and output options in a compact form, combining universal inputs (UI), analog output, and relay output
into a single device.The universal inputs support Digital Input (DI), NTC10K temperature sensors, or Analog Input (0–10 V),
enabling integration with a wide range of field devices.The module also includes a 0–10 V analog output for control signals
(e.g., to VSDs, actuators) and a relay output for switching loads.
Powered by 24 V DC, the OMM-351 ensures reliable operation and seamless communication through Modbus RTU protocol.
A built-in Wi-Fi web interface allows quick and easy configuration of communication and I/O parameters.

OMM-851 Mixed Modbus RTU Module

The OMM-851 is a compact and flexible mixed I/O module designed for industrial and building automation applications.

It integrates digital inputs, relay outputs, and analog I/O (0–10 V) into a single unit, making it ideal for interfacing with field devices such

as sensors, actuators, and controllers. With Modbus RTU communication over RS485 and

an intuitive Wi-Fi web interface for configuration, the OMM-851 ensures seamless system integration and easy setup.

OMM-851.EXT Mixed ONAS BUS Module

The OMM-851.EXT is a compact and flexible mixed I/O module designed for industrial and building automation applications.
It integrates digital inputs, relay outputs into a single unit, making it ideal for interfacing with field devices such
as actuators, and controllers. With ONAS-BUS communication connected with OMM-851 or OMM-351.

ONCO-5042 Carbon Monoxide Modbus RTU Sensor

Modbus RTU Sensor 24V AC /DC
Meets UL2034, EN50291, and RoHS requirements Applications
Simple calibration Long life
Ventilation control for indoor parking garages
UL recognized component (TGS-5042)
Recreational vehicle CO detectors
Residential and commercial CO detectors CO monitors for industrial applications